Call for Service 603-826-6000

Water Heaters

Power Vented Natural or LP Gas Water Heater Replacement

Power Vented Natural or LP Gas Water Heater Water Heater Special

State Select ® Power Vent 40 Gallon Water Heater

http://www.statewaterheaters.com/products/residential/gas/

Replacement Natural or LP Gas State Select Power Vent 40 Gallon Water Heater

Installed Replacement for $2,250.00* 

*GAS VENTING ADDITIONAL & PRICE DEPENDS ON DISTANCE AND LOCATION.

PVC VENTING IS NO LONGER ACCEPTED IN NH

New NH Gas Venting Regulations forced a price increase on all new Power Vented Water Heaters

Click Below to read the NH State Bulletin on Venting Gas Appliances

https://www.nh.gov/safety/divisions/firesafety/bulletins/documents/2015-10-ApplianceVenting-SystemMaintenance.pdf

State Select ® Power Vent 50 Gallon Water Heater Installed – $2,450.00*

State Select ® Power Vent 75 Gallon Water Heater Installed – $2,750.00*

Features:

  • Tanks from 40-75 gallons with recovery rates of 41-72 gallons per hour and BTU inputs of 40,000-70,000
  • Quiet modular blower
  • Long-lasting polymer dip tube with diffuser design to protect against lime and sediment buildup
  • Standard Intelli-Vent gas control with silicon nitride hot surface igniter to ensure optimum performance
  • 6-year tank and parts warranty

Permit & mixing valve are additional if required – Standard Installation – additional parts may be required  – Cannot be combined with other offers or specials – New installations are additional due to venting requirements – Electrical not included. 110V outlet must be within 5′ of unit.  Reconnect to existing PVC venting included – removal of old water heater included.

*Water Heater Pan and/or Auto Shutoff are additional per IPC code 504.7 Required pan. Where water heaters or hot water storage tanks are installed in locations where leakage of the tanks or connections will cause damage. 

Mixing Valve Parts & Installation at time of service

Honeywell Thermostatic Mixing Valve Model # AM101C- 3/4″ – $225.00
Honeywell AMX300TLF 8″ LF W/H CONN MIXING VALVE KIT 3/4″ – $255.00

Save $50 when you sign up for our Monthly Email Newsletter on the homepage!

Schedule service

ENJOY ENDLESS HOT WATER….Install a HIGH-EFFICIENCY Gas On Demand Water Heater

On Demand Water HeaterENJOY ENDLESS HOT WATER

Install a HIGH-EFFICIENCY Gas On Demand Water Heater

State 340H & 540H Series On Demand Water Heater

http://www.statewaterheaters.com/products/residential/tankless/

The 340H series offers high efficiency Ultra-Low NOx condensing technology allowing for the use of 3″ PVC venting and has 0″ clearance to combustibles.

Utilizes HRS35 copper alloy for the heat exchanger tubing.

Remote control included as a standard feature.

Warranty Information** Residential Use:

15 years limited heat exchanger, 5 years limited parts

**Refer to www.statewaterheaters.com for further warranty details

State 340H Complete Installed Price Starting @ Only $3,150.00 Plus Gas Venting*

State 540H Complete Installed Price Starting @ Only $3,650.00 Plus Gas Venting*

This unit qualifies for NH & MA Energy Rebates

New NH Gas Venting Regulations forced a price increase on all new Power Vented Water Heaters

Click Below to read the NH State Bulletin on Venting Gas Appliances

https://www.nh.gov/safety/divisions/firesafety/bulletins/documents/2015-10-ApplianceVenting-SystemMaintenance.pdf

Installation includes the following:

  • Wall mount on plywood frame
  • To be side wall vented up to 10′.
  • Gas pipe modification up to 10′
  • Move water pipes to feed new heater location
  • Condensate Pump included
  • Removal and disposal of old water heater
  • Standard Installation

120v double outlet is required within 4′ of unit for power.

***Electrical is not included, New gas lines not included

Permit is additional if required. – Standard Installation as described. Additional parts may be required.

Cannot be combined with other offers or specials – While supplies last at this price.

Schedule Now

40 Gallon Electric Water Heater

New 2015 Regulations forced a price increase

on all new Water Heaters 

Click below to read consumer reports Article.

http://www.consumerreports.org/cro/news/2015/03/read-this-before-replacing-your-water-heater/index.htm

Electric Water Heater

State Select ®waterheater

Electric Water Heater Replacement

40 Gallon Electric Water Heater 

$1200.00 Installed*

*Permit & mixing valve are additional if required. Standard installation. Additional parts may be required. Cannot be combined with other offers or specials.
*Water Heater Pan and/or Auto Shutoff are additional per IPC code 504.7 Required pan. Where water heaters or hot water storage tanks are installed in locations where leakage of the tanks or connections will cause damage. 

*Mixing Valve Parts & Installation at time of service

Honeywell Thermostatic Mixing Valve Model # AM101C- 3/4″ – $225.00
Honeywell AMX300TLF 8″ LF MIXING VALVE KIT 3/4″ – $255.00

* Cannot be combined with other offers or specials.

Standard Gas Chimney 40 Gallon Water Heater Natural or LP gas, Natural Draft

New 2015 Regulations forced a price increase

on all new Water Heaters 

http://www.consumerreports.org/cro/news/2015/03/read-this-before-replacing-your-water-heater/index.htm

Natural or LP Gas Natural Draft

Water Heater

State Select 40 Gallon Water HeaterState Water heater

Installed for $1,700.00*

Features:

  • Tanks from 40-75 gallons with recovery rates of 41-72 gallons per hour and BTU inputs of 40,000-70,000
  • Long-lasting polymer dip tube with diffuser design to protect against lime and sediment buildup
  • Standard Intelli-Vent gas control with silicon nitride hot surface igniter to ensure optimum performance
  • 6-year tank and parts warranty

Terms & Conditions: Permit & mixing valve are additional if required – Standard Installation – additional parts may be required  – Cannot be combined with other offers or specials – New installations are additional due to venting requirements – removal of old water heater included. New installations are additional. Some Chimney’s may require a liner depending on local codes which is not included. 

*Mixing Valve Parts & Installation at time of service

Honeywell Thermostatic Mixing Valve Model # AM101C- 3/4″ – $225.00
Honeywell AMX300TLF 8″ LF W/H CONN MIXING VALVE KIT 3/4″ – $255.00

* Water Heater Pan and/or Auto Shutoff are additional per IPC code 504.7 Required pan. Where water heaters or hot water storage tanks are installed in locations where leakage of the tanks or connections will cause damage. 

* Cannot be combined with other offers or specials.

Whole House Sediment Filter with copper ball valve bypass valves.

Water Filter American Plumber clear

Schedule Now

Install a Whole House Sediment Filter with copper ball valve bypass valves.

The right way to do it. (Ask and we will explain)

3/4″   $539.00 Installed
1″       $589.00 Installed

Aqua-Pure Whole House Filter System

  • Large diameter high flow filter for cold water
  • Sediment filter Included
  • Inlet/Outlet 1″ NPT
  • Flow Rate: 20 GPM (75.7lpm)
  • Max Temp: 100°F
  • Applicable Cartridges:
  • Dirt/Rust: AP810, AP811, AP814
  • Taste/Odor: AP815, AP817
  • Note: Flow Rates are based on the use of the Dirt/Rust Filter Cartridge and 1″ filter.

Recommended with Installation for On Demand Water Heaters

New SSU 45 SuperStor Ultra Indirect Tank


New SSU 45 SuperStor Ultra Indirect Tank

  • New Tanks Installed Starting at $2,500.00*
  • Replacement Tanks Starting at $1,950.00*

SuperStor 45 Gal

Installation Includes:

  • 45 GALLON TANK
  • ALL NECESSARY PLUMBING TO CONNECT TO YOUR EXISTING HOT WATER BOILER
  • ADDITIONAL ZONE ADDED ONTO EXISTING HOT WATER BOILER (for new installations)
  • NEW CIRCULATOR (for new installations)
  • SINGLE ZONE RELAY CONTROL (for new installations)
  • PROFESSIONAL INSTALLATION
  • OPTIONAL HI LIMIT AQUASTAT IS ADDITIONAL – typically $350.00

Get More Hot Water Today!

* Basic/Typical installation included
* Additional charges may apply
* Call for details

On Demand Water Heater & Tune-up

  • Once a Year Cleaning Special

    $135.00

    Step 1—Flush the unit:
    This process will safely dissolve the buildup of lime and scale and help keep the unit running like new.

    Step 2—Check and clean In-line screen filter:
    Much like your lint screen on your dryer it must be cleaned out to keep water flowing properly.

    Notice: This process can take anywhere from 45 minutes to 1 hour.

    Don’t be fooled by those unqualified technicians that are in & out in 20 minutes. If they are done that quickly then they didn’t do the job correctly!